⟁ Arizona Well Data field records · 2026 survey

Arizona Well Data › Graham County › Fort Thomas (85536)

Fort Thomas, AZ (85536): well depth, water level & drilling cost

✓ 393 ADWR records · Graham County

80 ftmedian well depth
60 ft–100 fttypical depth range
40 ftmedian static water level
80 gpmmedian yield (307 tests)

Pull every recorded well near a Fort Thomas (85536) address — $49

How deep are wells in and around Fort Thomas (85536), Arizona?

The median drilled well depth in and around Fort Thomas (85536) is 80 ft, based on 370 wells with recorded depths in the state ADWR database. Half fall between 60 ft and 100 ft; 90% are shallower than 125 ft.

How much does it cost to drill a well in and around Fort Thomas (85536)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Fort Thomas (85536)?

The median static water level is 40 ft below ground surface (middle half of wells: 25 ft–63 ft), from 351 measurements.

Drilled depth distribution

0–50 ft 16 50–100 ft 248 100–150 ft 97 150–200 ft 4 200–300 ft 3 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Fort Thomas (85536)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Fort Thomas (85536)

Free. Goes to licensed drillers working Graham County.

Part of Graham County well records.

Method: medians computed from ADWR records (ADWR registered wells, excluding the 51,744 registrations the department has cancelled; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.