⟁ Arizona Well Data field records · 2026 survey

Arizona Well Data › Gila County › Pine (85544)

Pine, AZ (85544): well depth, water level & drilling cost

✓ 646 ADWR records · Gila County

208 ftmedian well depth
150 ft–300 fttypical depth range
97 ftmedian static water level
12 gpmmedian yield (370 tests)

Pull every recorded well near a Pine (85544) address — $49

How deep are wells in and around Pine (85544), Arizona?

The median drilled well depth in and around Pine (85544) is 208 ft, based on 591 wells with recorded depths in the state ADWR database. Half fall between 150 ft and 300 ft; 90% are shallower than 440 ft.

How much does it cost to drill a well in and around Pine (85544)?

Applying published per-foot rates to the local median depth of 208 ft: drilling and casing alone typically runs $5,200–$13,520; a complete system including pump, pressure tank, and hookup typically runs $12,480–$20,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pine (85544)?

The median static water level is 97 ft below ground surface (middle half of wells: 45 ft–150 ft), from 517 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 34 100–150 ft 97 150–200 ft 95 200–300 ft 184 300–400 ft 75 400–600 ft 64 600+ ft 34
Looking at a specific property in Pine (85544)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pine (85544)

Free. Goes to licensed drillers working Gila County.

Part of Gila County well records.

Method: medians computed from ADWR records (ADWR registered wells, excluding the 51,744 registrations the department has cancelled; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.