⟁ Arizona Well Data field records · 2026 survey

Arizona Well Data › Graham County › Thatcher (85552)

Thatcher, AZ (85552): well depth, water level & drilling cost

✓ 859 ADWR records · Graham County

86 ftmedian well depth
70 ft–117 fttypical depth range
45 ftmedian static water level
400 gpmmedian yield (347 tests)

Pull every recorded well near a Thatcher (85552) address — $49

How deep are wells in and around Thatcher (85552), Arizona?

The median drilled well depth in and around Thatcher (85552) is 86 ft, based on 648 wells with recorded depths in the state ADWR database. Half fall between 70 ft and 117 ft; 90% are shallower than 810 ft.

How much does it cost to drill a well in and around Thatcher (85552)?

Applying published per-foot rates to the local median depth of 86 ft: drilling and casing alone typically runs $2,150–$5,590; a complete system including pump, pressure tank, and hookup typically runs $5,160–$8,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Thatcher (85552)?

The median static water level is 45 ft below ground surface (middle half of wells: 32 ft–65 ft), from 600 measurements.

Drilled depth distribution

0–50 ft 60 50–100 ft 340 100–150 ft 120 150–200 ft 12 200–300 ft 5 300–400 ft 14 400–600 ft 13 600+ ft 84
Looking at a specific property in Thatcher (85552)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Thatcher (85552)

Free. Goes to licensed drillers working Graham County.

Part of Graham County well records.

Method: medians computed from ADWR records (ADWR registered wells, excluding the 51,744 registrations the department has cancelled; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.